Home  >  Blog
  • 26
    2017-06
    1. Power light does not light.Reason: Power supply fault. Maintenance method: Replace the power supply.2. Link lights are not lit.Failure may be as follows:(A) Check whether the fiber lines circuit breakers(B) Check whether the fiber line loss is too great, over equipment reception range(C) Check whether the optical interfaces are connected properly, local TX and RX connections from afar, TX and RX connections of the local in the distance.
  • 26
    2017-06
    The low-cost and low-delay SFP direct attach twin-axial cable for data center. The continuous innovation network technology and the increasing network application promote the rapid development of the network.As the information data exchange processing and network equipment stored, the data center always faces the challenge of a high bandwidth, high reliability and low delay.
  • 26
    2017-06
    Optical fiber interface is the physical interface used to connect optical fiber cable.The principle of optical fiber interface is the total reflection of using the light from the optically denser medium into optically thinner medium.
  • 26
    2017-06
    10G XFP module which is widely applied. The hot-pluggable 10G XFP is the fiber optic transceiver which is independent of the communication protocol. Usually, it supports the wavelength of 850nm, 1310nm or 1550nm.
  • 25
    2017-06
    GBIC means Gigabit Interface Converter which is the interface device converts the gigabit electrical signals to optical signals. In design, GBIC can be used for hot-plug. GBIC is the interchangeable product that meets the international standards.
RECENT BLOG POST
  • 01
    2019-10
    With the continuous development of 5G communication technology, 100G modules are gradually becoming popular. We know that there are many kinds of packages for 100G optical modules. From 2000 to now, the optical module package types have been rapidly developed. Its main package types are: GBIC, SFP, XENPAK, SNAP12, X2, XFP, SFP+, QSFP/QSFP+, CFP, CXP. In the fast-developing network era, some 100G optical modules avoid the risk of being eliminated, and upgraded and revised with the wave of the Internet, such as 100G CFP optical modules.
  • 01
    2019-10
    1. What is the CWDM SFP? The CWDM optical module is an optical module using CWDM technology to implement the connection between the existing network device and the CWDM multiplexer/demultiplexer. When used with a CWDM multiplexer/demultiplexer, CWDM optical modules can increase network capacity by transmitting multiple data channels with separate optical wavelengths (1270 nm to 1610 nm) on the same single fiber.
  • 01
    2019-10
    AOC is the abbreviation of Active Optical Cables, which is called Active Optical Cables in Chinese. AOC active optical is to encapsulate two optical modules and cable together. Because the medium of transmission in the middle is optical cable, AOC optical module, which contains laser devices, has a higher price for DAC. However, its optical aperture is not exposed, it has high reliability, and its working distance can be customized for a long distance of less than 100 meters.
  • 01
    2019-10
    Dense Wavelength Division Multiplexing (DWDM) technology is capable of transmitting data in an optical fiber using bit wavelength parallel transmission or string line transmission using the wavelength of the laser.It is widely used in different fields of communication networks, including long-distance backbone networks, metropolitan area networks (MANs), residential access networks, and local area networks (LANs).The DWDM optical module is the optical module that uses this technology, so the DWDM optical module has high bandwidth and long-distance transmission characteristics.
QUICK QUERY