Installation process of CFP2 optical module
2017-08-31
Today, Fiberland will share the CFP2 optical module installation process with you. What preparations and attention should be made before installation? Let’s learn about it!
1. Preparation before installation
To avoid the static electricity generated during installation causes damage to CFP2 optical transceiver or electronic devices in equipment. Before installing or removing the CFP2 module, please wear the anti-static bracelet on your wrist, tighten the lock, make sure the anti-static bracelet is in good touch with the skin, and make sure that the anti-static bracelet is well grounded.
2. Installation and disassemble of CFP2 optical module
Warning: In the process of installing or pulling out the CFP2 optical module, please do not touch the gold finger of the CFP2 module with your hand directly.
Installation diagram of CFP2 module
Turn the metal ring up vertically
According to the diagram, make sure that the module is installed in the right direction(The ring is located above the fiber optic interface). Push the module gently into the slot in the horizontal direction, until you hear the module blocking the slot. When the module is in close contact with the slot, no further push into the module.
Disassemble diagram of of CFP2 module
★ Pull out the fiber on the CFP2 module and pull the metal ring down to the horizontal position
★ Pull the tab and pull the module out horizontally lightly, so as not to damage the ring.
3.Notice
◆ If the CFP2 module to be installed or disassembled is inserted with an optical fiber, please pull out the fiber and then install or disassemble the CFP2 module.
◆ When inserting the CFP2 module, check that the module is properly inserted into the port. Ensure correct orientation and no dislocation, offset, etc., and then push the module into place.
◆ When removing the CFP2 module, pull out the plug along the horizontal line.If there is an angle between the force direction and the horizontal direction, it will make it difficult to pull out the plug and even damage the module and slot.
◆ After finishing CFP2 module installation, if not immediately install fiber, please insert the dust plug.
XFP module,XFP transceiver,bidi sfp,SFP+ module,SFP+ transceiver Which is good? First choice Fiberland！Thanks for your concern, to learn more about Fiberland, please enter Fiberland website: http://www.fiberlandtec.com/
1. Preparation before installation
To avoid the static electricity generated during installation causes damage to CFP2 optical transceiver or electronic devices in equipment. Before installing or removing the CFP2 module, please wear the anti-static bracelet on your wrist, tighten the lock, make sure the anti-static bracelet is in good touch with the skin, and make sure that the anti-static bracelet is well grounded.
2. Installation and disassemble of CFP2 optical module
Warning: In the process of installing or pulling out the CFP2 optical module, please do not touch the gold finger of the CFP2 module with your hand directly.
Installation diagram of CFP2 module
Turn the metal ring up vertically
According to the diagram, make sure that the module is installed in the right direction(The ring is located above the fiber optic interface). Push the module gently into the slot in the horizontal direction, until you hear the module blocking the slot. When the module is in close contact with the slot, no further push into the module.
Disassemble diagram of of CFP2 module
★ Pull out the fiber on the CFP2 module and pull the metal ring down to the horizontal position
★ Pull the tab and pull the module out horizontally lightly, so as not to damage the ring.
3.Notice
◆ If the CFP2 module to be installed or disassembled is inserted with an optical fiber, please pull out the fiber and then install or disassemble the CFP2 module.
◆ When inserting the CFP2 module, check that the module is properly inserted into the port. Ensure correct orientation and no dislocation, offset, etc., and then push the module into place.
◆ When removing the CFP2 module, pull out the plug along the horizontal line.If there is an angle between the force direction and the horizontal direction, it will make it difficult to pull out the plug and even damage the module and slot.
◆ After finishing CFP2 module installation, if not immediately install fiber, please insert the dust plug.
XFP module,XFP transceiver,bidi sfp,SFP+ module,SFP+ transceiver Which is good? First choice Fiberland！Thanks for your concern, to learn more about Fiberland, please enter Fiberland website: http://www.fiberlandtec.com/
RECENT BLOG POST
-
012019-10With the continuous development of 5G communication technology, 100G modules are gradually becoming popular. We know that there are many kinds of packages for 100G optical modules. From 2000 to now, the optical module package types have been rapidly developed. Its main package types are: GBIC, SFP, XENPAK, SNAP12, X2, XFP, SFP+, QSFP/QSFP+, CFP, CXP. In the fast-developing network era, some 100G optical modules avoid the risk of being eliminated, and upgraded and revised with the wave of the Internet, such as 100G CFP optical modules.
-
012019-101. What is the CWDM SFP? The CWDM optical module is an optical module using CWDM technology to implement the connection between the existing network device and the CWDM multiplexer/demultiplexer. When used with a CWDM multiplexer/demultiplexer, CWDM optical modules can increase network capacity by transmitting multiple data channels with separate optical wavelengths (1270 nm to 1610 nm) on the same single fiber.
-
012019-10AOC is the abbreviation of Active Optical Cables, which is called Active Optical Cables in Chinese. AOC active optical is to encapsulate two optical modules and cable together. Because the medium of transmission in the middle is optical cable, AOC optical module, which contains laser devices, has a higher price for DAC. However, its optical aperture is not exposed, it has high reliability, and its working distance can be customized for a long distance of less than 100 meters.
-
012019-10Dense Wavelength Division Multiplexing (DWDM) technology is capable of transmitting data in an optical fiber using bit wavelength parallel transmission or string line transmission using the wavelength of the laser.It is widely used in different fields of communication networks, including long-distance backbone networks, metropolitan area networks (MANs), residential access networks, and local area networks (LANs).The DWDM optical module is the optical module that uses this technology, so the DWDM optical module has high bandwidth and long-distance transmission characteristics.
