Juniper Networks Provides Multilayer Data Center Interconnect Approach
2017-08-16
The optical transmission upgrades for Open Cloud Interconnect apply to the QFX10000 and BTI7800. The QFX10000 Coherent DWDM Line Card supports 1.2 Tbps of optical capacity with six ports of up to 200 Gbps each. The new line card enables the QFX1000 to combine DCI-optimized Ethernet VPN (EVPN), VXLAN, and MacSec security with coherent DWDM transmission.
The UFM6 line card for the BTI7800 series, meanwhile, is a new muxponder/transponder that supports 10 configurable 10/100 Gigabit Ethernet client ports and two 200-Gbps coherent DWDM ports. The UFM6 also supports SD-FEC to support metro, regional, and long-haul spans up to 2000 km. The card is fully interoperable with Juniper and third-party coherent DWDM line cards, the company says.
To tie together the platform elements of Open Cloud Interconnect, Juniper has enabled its proNX Service Manager software to manage coherent optical interfaces across Juniper's MX and PTX Series Routers, QFX Series Switches, and the BTI Series packet-optical transport portfolio. YANG-based integration of the proNX Service Manager and Juniper Networks' NorthStar Controller offers enhanced levels of network visibility and multi-layer control, the company asserts.
"The demand for cloud services is bringing forth a tidal wave of change and new opportunities for the networking industry. The DCI infrastructure demands bandwidth capacity, secure connectivity and operational simplicity," stated Masum Mir, vice president of Product, Solutions & Technical Marketing, Juniper Development and Innovation at Juniper Networks. "Juniper's Open Cloud Interconnect solution represents a comprehensive approach to DCI that is designed to enable customers to build a network utilizing advanced capabilities of routing, switching and coherent optical transport to help cloud infrastructure providers and enterprises accelerate their time-to-business value, while maximizing operational efficiency."
"Meeting the challenges of scaling and operating DCI networks is increasingly important as network operators of all kinds seek revenue growth from cloud business opportunities," added Heidi Adams, Senior Research Director, Transport Networks at IHS Markit, via a Juniper Networks press release. "DCI networks today range from simple point-to-point configurations to more sophisticated, multi-service mesh networks. With Open Cloud Interconnect, Juniper acknowledges this diversity in DCI networks, bringing to market a flexible, multi-layer solution set geared to simplifying overall DCI network design and operations for cloud providers, service providers, and enterprises."
The UFM6 line card and updated proNX Service Manager software are available now. Juniper expects to make the Coherent DWDM line card for the QFX10000 available in the second quarter of this year.
SFP+ module,SFP+ transceiver,bidi sfp,XFP module,XFP transceiver Which is good? First choice Fiberland！Thanks for your concern, to learn more about Fiberland, please enter Fiberland website: http://www.fiberlandtec.com/
The UFM6 line card for the BTI7800 series, meanwhile, is a new muxponder/transponder that supports 10 configurable 10/100 Gigabit Ethernet client ports and two 200-Gbps coherent DWDM ports. The UFM6 also supports SD-FEC to support metro, regional, and long-haul spans up to 2000 km. The card is fully interoperable with Juniper and third-party coherent DWDM line cards, the company says.
To tie together the platform elements of Open Cloud Interconnect, Juniper has enabled its proNX Service Manager software to manage coherent optical interfaces across Juniper's MX and PTX Series Routers, QFX Series Switches, and the BTI Series packet-optical transport portfolio. YANG-based integration of the proNX Service Manager and Juniper Networks' NorthStar Controller offers enhanced levels of network visibility and multi-layer control, the company asserts.
"The demand for cloud services is bringing forth a tidal wave of change and new opportunities for the networking industry. The DCI infrastructure demands bandwidth capacity, secure connectivity and operational simplicity," stated Masum Mir, vice president of Product, Solutions & Technical Marketing, Juniper Development and Innovation at Juniper Networks. "Juniper's Open Cloud Interconnect solution represents a comprehensive approach to DCI that is designed to enable customers to build a network utilizing advanced capabilities of routing, switching and coherent optical transport to help cloud infrastructure providers and enterprises accelerate their time-to-business value, while maximizing operational efficiency."
"Meeting the challenges of scaling and operating DCI networks is increasingly important as network operators of all kinds seek revenue growth from cloud business opportunities," added Heidi Adams, Senior Research Director, Transport Networks at IHS Markit, via a Juniper Networks press release. "DCI networks today range from simple point-to-point configurations to more sophisticated, multi-service mesh networks. With Open Cloud Interconnect, Juniper acknowledges this diversity in DCI networks, bringing to market a flexible, multi-layer solution set geared to simplifying overall DCI network design and operations for cloud providers, service providers, and enterprises."
The UFM6 line card and updated proNX Service Manager software are available now. Juniper expects to make the Coherent DWDM line card for the QFX10000 available in the second quarter of this year.
SFP+ module,SFP+ transceiver,bidi sfp,XFP module,XFP transceiver Which is good? First choice Fiberland！Thanks for your concern, to learn more about Fiberland, please enter Fiberland website: http://www.fiberlandtec.com/
RECENT BLOG POST
-
012019-10With the continuous development of 5G communication technology, 100G modules are gradually becoming popular. We know that there are many kinds of packages for 100G optical modules. From 2000 to now, the optical module package types have been rapidly developed. Its main package types are: GBIC, SFP, XENPAK, SNAP12, X2, XFP, SFP+, QSFP/QSFP+, CFP, CXP. In the fast-developing network era, some 100G optical modules avoid the risk of being eliminated, and upgraded and revised with the wave of the Internet, such as 100G CFP optical modules.
-
012019-101. What is the CWDM SFP? The CWDM optical module is an optical module using CWDM technology to implement the connection between the existing network device and the CWDM multiplexer/demultiplexer. When used with a CWDM multiplexer/demultiplexer, CWDM optical modules can increase network capacity by transmitting multiple data channels with separate optical wavelengths (1270 nm to 1610 nm) on the same single fiber.
-
012019-10AOC is the abbreviation of Active Optical Cables, which is called Active Optical Cables in Chinese. AOC active optical is to encapsulate two optical modules and cable together. Because the medium of transmission in the middle is optical cable, AOC optical module, which contains laser devices, has a higher price for DAC. However, its optical aperture is not exposed, it has high reliability, and its working distance can be customized for a long distance of less than 100 meters.
-
012019-10Dense Wavelength Division Multiplexing (DWDM) technology is capable of transmitting data in an optical fiber using bit wavelength parallel transmission or string line transmission using the wavelength of the laser.It is widely used in different fields of communication networks, including long-distance backbone networks, metropolitan area networks (MANs), residential access networks, and local area networks (LANs).The DWDM optical module is the optical module that uses this technology, so the DWDM optical module has high bandwidth and long-distance transmission characteristics.
